Are iPhone 13 Pro And 14 Pro The Same Size
Share
No, the **iPhone 13 Pro and iPhone 14 Pro are not the same size**, and their cases are **not compatible**. Although their screen sizes are both 6.1 inches, the iPhone 14 Pro is slightly taller, thicker, features shifted button positions, and has a significantly larger camera bump than the iPhone 13 Pro.
When upgrading from the iPhone 13 Pro to the iPhone 14 Pro, many users hope to save money by reusing their premium cases. After all, both devices feature a 6.1-inch OLED display. However, in our laboratory, our diagnostic experts performed precise calliper measurements on both models and confirmed that minor design adjustments make cases completely non-interchangeable. In this guide, we analyze the dimensions, button shifts, and camera bump differences to explain why a new case is mandatory.
1. Physical Dimensions and Weight Comparison
A side-by-side analysis reveals tiny but critical differences in height, width, and thickness. The iPhone 14 Pro stands at 147.5 mm, which is 0.8 mm taller than the iPhone 13 Pro (146.7 mm). The width is nearly identical, with the iPhone 14 Pro being 71.5 mm and the iPhone 13 Pro being 71.5 mm. However, the iPhone 14 Pro is thicker, measuring 7.85 mm compared to the iPhone 13 Pro's 7.65 mm. While these sub-millimeter differences seem negligible, modern protective cases are engineered with tolerances below 0.1 mm, meaning the iPhone 14 Pro will not slide securely into an older case.
2. The Camera Bump Enlargement
The primary roadblock to case compatibility is the rear camera housing. The iPhone 14 Pro features a 48MP main sensor, which required Apple to enlarge the camera square significantly. The camera bump on the iPhone 14 Pro is both wider, taller, and protrudes further from the back glass than that of the iPhone 13 Pro. If you try to fit an iPhone 14 Pro into an iPhone 13 Pro case, the camera cutout will pinch the lenses, preventing the case from wrapping around the corners of the phone. Conversely, placing an iPhone 13 Pro into an iPhone 14 Pro case leaves a large, unsightly gap around the camera module, exposing it to dust and impact.
3. Power and Volume Button Shifts
Our diagnostic experts also noted that Apple slightly shifted the location of the side power button and the volume controls. On the iPhone 14 Pro, the buttons are located slightly lower than they are on the iPhone 13 Pro. As a result, the button covers on an iPhone 13 Pro case will not align with the physical buttons of the iPhone 14 Pro, leading to accidental presses, unresponsive controls, or constant pressure on the power button, which can trigger emergency SOS calls.
4. Step-by-Step: How to Safely Test Case Fitment Without Damaging Your Phone
If you have a case and are unsure which model it belongs to, follow this safe testing sequence to prevent scratching your device's rails:
- Inspect Cutouts: Hold the case up to light and look at the camera square. Compare it with the phone's lenses; if the cutout looks tight, do not force it.
- Insert Button Side First: Slide the side of the phone with the volume buttons into the case framework gently.
- Check for Resistance: Push the opposite corners in. If you feel strong resistance, stop immediately. Forcing a tight case can scratch the physical buttons or crack the screen glass.
- Verify Button Alignment: If the phone fits, press the power button. If it feels stiff or does not click, the buttons are misaligned.
- Check the Back Glass: Ensure the case sits flat against the back plate and that the camera lenses are fully centered in the cutout.
| Dimension Metric | iPhone 13 Pro | iPhone 14 Pro | Compatibility Status |
|---|---|---|---|
| Height | 146.7 mm | 147.5 mm | Different (No Fit) |
| Width | 71.5 mm | 71.5 mm | Identical |
| Thickness | 7.65 mm | 7.85 mm | Different (No Fit) |
| Weight | 204 grams | 206 grams | Comparable |
| Camera Bump Width | ~36.2 mm | ~38.2 mm | Different (No Fit) |
| Case Interchangeability | - | - | Non-Compatible |
Frequently Asked Questions (FAQ)
Can I use an iPhone 13 Pro screen protector on the 14 Pro?
No. The iPhone 13 Pro has a notch, whereas the iPhone 14 Pro features the Dynamic Island. The screen protectors have different shapes and border layouts, which can interfere with the proximity sensor.
Are there any cases that fit both the iPhone 13 Pro and 14 Pro?
No reputable manufacturer sells a case that fits both, as the structural differences in the camera bump make a dual-fit case functionally impossible.
Where can I find official dimensions for Apple devices?
Detailed dimensions can be confirmed on the official Apple Support specs pages or on tear-down guides on iFixit.
Internal & External Resources
-
For the base models, read our analysis on Are iPhone 13 and 14 Same Size to check case cross-compatibility.
-
Check out our guide on Should I Get a MagSafe Case or Regular to help choose your new cover.
For more official support and repair information, refer to Apple Support or inspect teardown tutorials on iFixit.